1.第一种情况是需要将指定的注入字符串全部替换掉（仅替换注入的字符串为空）复制代码代码如下:declare@delStrnvarchar(500) set@delStr='<scriptsrc=https://www.jb51.net/js/common.js></script>'--这里被注入的字段串 /****************************************/ /**********以下为操作实体************/ setnocounton declare@tableNamenvarchar(100),@columnNamenvarchar(100),@tbIDint,@iRowint,@iResultint declare@sqlnvarchar(2000) set@iResult=0 declarecurcurso
1.第一种情况是 需要将指定的 注入字符串全部替换掉（仅替换注入的字符串为空）
复制代码 代码如下:
declare @delStr nvarchar(500)
set @delStr='<script src=https://www.jb51.net/js/common.js></script>' --这里被注入的字段串
/****************************************/
/**********以下为操作实体************/
set nocount on
declare @tableName nvarchar(100),@columnName nvarchar(100),@tbID int,@iRow int,@iResult int
declare @sql nvarchar(2000)
set @iResult=0
declare cur cursor for
select name,id from sysobjects where xtype='U'
open cur
fetch next from cur into @tableName,@tbID
while @@fetch_status=0
begin
declare cur1 cursor for
select name from syscolumns where xtype in (231,167,239,175, 35, 99) and id=@tbID
open cur1
fetch next from cur1 into @columnName
while @@fetch_status=0
begin
set @sql='update [' + @tableName + '] set ['+ @columnName +']= SUBSTRING([' + @columnName + '],' + '1, PATINDEX( ''%' + @delStr + '%'', [' + @columnName + '])-1) + ' + 'SUBSTRING([' + @columnName + '], PATINDEX( ''%' + @delStr + '%'', [' + @columnName + ']) + ' + 'len(''' + @delStr + ''') , datalength([' + @columnName + '])) where ['+@columnName+'] like ''%'+@delStr+'%'''
exec sp_executesql @sql
set @iRow=@@rowcount
set @iResult=@iResult+@iRow
if @iRow>0
begin
print '表：'+@tableName+',列:'+@columnName+'被更新'+convert(varchar(10),@iRow)+'条记录;'
end
fetch next from cur1 into @columnName
end
close cur1
deallocate cur1
fetch next from cur into @tableName,@tbID
end
print '数据库教程共有'+convert(varchar(10),@iResult)+'条记录被更新!!!'
close cur
deallocate cur
set nocount off
2.第二种是 需要将注入到表中起始位置到最后都删掉。（此种方法直接找到注入的起始位置，后面的全部删掉）
复制代码 代码如下:
--恢复被注入数据库
--2013-09-26
declare @delStr nvarchar(500)
set @delStr='</title><style>.' --被注入的字段串的开始采样，从此位置后面的数据都为注入数据
/**********以下为操作实体************/
set nocount on
declare @tableName nvarchar(100),@columnName nvarchar(100),@tbID int,@iRow int,@iResult int
declare @sql nvarchar(2000)
set @iResult=0
declare cur cursor for
select name,id from sysobjects where xtype='U'
open cur
fetch next from cur into @tableName,@tbID
while @@fetch_status=0
begin
declare cur1 cursor for
select name from syscolumns where xtype in (231,167,239,175, 35, 99) and id=@tbID
open cur1
fetch next from cur1 into @columnName
while @@fetch_status=0
begin
set @sql='update [' + @tableName + '] set ['+ @columnName +']=
SUBSTRING([' + @columnName + '],1, PATINDEX( ''%' + @delStr + '%'', [' + @columnName + '])-1) where ['+@columnName+'] like ''%'+@delStr+'%'''
exec sp_executesql @sql
set @iRow=@@rowcount
set @iResult=@iResult+@iRow
if @iRow>0
begin
print '表：'+@tableName+',列:'+@columnName+'被更新'+convert(varchar(10),@iRow)+'条记录;'
end
fetch next from cur1 into @columnName
end
close cur1
deallocate cur1
fetch next from cur into @tableName,@tbID
end
print '数据库教程共有'+convert(varchar(10),@iResult)+'条记录被更新!!!'
close cur
deallocate cur
set nocount off
声明：本文内容来源自网络，文字、图片等素材版权属于原作者，平台转载素材出于传递更多信息，文章内容仅供参考与学习，切勿作为商业目的使用。如果侵害了您的合法权益，请您及时与我们联系，我们会在第一时间进行处理！我们尊重版权，也致力于保护版权，站搜网感谢您的分享！
