Notice (8): file_put_contents(): Write of 274 bytes failed with errno=28 No space left on device [CORE/src/Log/Engine/FileLog.php, line 140]

Notice: file_put_contents() [function.file-put-contents]: Write of 1108 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
Notice (8): SplFileObject::fwrite() [<a href='https://secure.php.net/splfileobject.fwrite'>splfileobject.fwrite</a>]: Write of 5437 bytes failed with errno=28 No space left on device [CORE/src/Cache/Engine/FileEngine.php, line 141]

Notice: file_put_contents() [function.file-put-contents]: Write of 3152 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
Notice (8): unserialize() [<a href='https://secure.php.net/function.unserialize'>function.unserialize</a>]: Error at offset 85980 of 86005 bytes [APP/Controller/NewsController.php, line 5571]

Notice: file_put_contents() [function.file-put-contents]: Write of 2490 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
Notice (8): unserialize() [<a href='https://secure.php.net/function.unserialize'>function.unserialize</a>]: Error at offset 90093 of 90101 bytes [APP/Controller/NewsController.php, line 5571]

Notice: file_put_contents() [function.file-put-contents]: Write of 2490 bytes failed with errno=28 No space left on device in /www/wwwroot/www.adminso.com/vendor/cakephp/cakephp/src/Log/Engine/FileLog.php on line 140
重装系统后找不到内置调制解调器 - 站长搜索
首页 > 资讯列表 > 软件学院 >> 系统程序

重装系统后找不到内置调制解调器

系统程序 2014-12-01 06:32:25 转载来源: 网络整理/侵权必删

      由于电脑出现问题,导致网速很慢,因为其他同事使用的很正常,这时候只有将系统重装了。但是重新安装Windows XP后,才发现系统无论如何也找不剑金网霸ESS2838内置调制解调器,驱动程序更没法安装

  

    由于电脑出现问题,导致网速很慢,因为其他同事使用的很正常,这时候只有将系统重装了。但是重新安装Windows XP后,才发现系统无论如何也找不剑金网霸ESS2838内置调制解调器,驱动程序更没法安装。记得当初商家是把它装住COM4上的,可是主机上只有COMl和COM2。 排除过程     确定故障产生的原因后,排除故障的过程如下。     (1)右击“我的电脑”图标,在弹出的快捷菜单中选择“属性”命令,打开“系统属性”对话框。     (2)切换到“硬件”选项卡,单击“设备管理器”按钮,打开“设备管理器”窗口。     (3)在“其他设备”一栏里有一个PCI设备,升级安装这个PCI设备的驱动程序,完成后即是虚拟的COM口。     (4)重新启动电脑后,系统就会在这个端口上找剑内置调制解调器。  

(责任编辑:admin)

标签: 重装 系统 不到 内置 调制解调器


声明:本文内容来源自网络,文字、图片等素材版权属于原作者,平台转载素材出于传递更多信息,文章内容仅供参考与学习,切勿作为商业目的使用。如果侵害了您的合法权益,请您及时与我们联系,我们会在第一时间进行处理!我们尊重版权,也致力于保护版权,站搜网感谢您的分享!

站长搜索

http://www.adminso.com

Copyright @ 2007~2025 All Rights Reserved.

Powered By 站长搜索

打开手机扫描上面的二维码打开手机版


使用手机软件扫描微信二维码

关注我们可获取更多热点资讯

站长搜索目录系统技术支持